| WS7 | |||||||
| The machine is equipped with an electronic control panel with diagnostic display | |||||||
| TOOL HOLDER SHAFT DIAMETER | 100mm (3.94in) | ||||||
| TOOL HOLDER SHAFT LENGTH | 3000mm Single Shaft (Potentially Connectable) |
||||||
| BORING DIAMETER | 400mm - 1,200mm (15.75in - 47.24in) | ||||||
| WELDING DIAMETER | 350mm - 1,200mm (13.78in - 47.24in) | ||||||
| WELDING TECHNOLOGY | Spiral (Continuous with Variable Step) | ||||||
| LONGITUDINAL STROKE | Unlimited with Step of 260mm (10.24in) | ||||||
| ROTATION MOTOR | C/C (CE Compliant) | ||||||
| FEED MOTOR | C/C (CE Compliant) | ||||||
| FEED SYSTEM | Electric - Mechanical | ||||||
| OUTPUT TORQUE AT THE BAR | 4200 Nm (41 RPM) | ||||||
| MAX ROTATION SPEED | 41 RPM | ||||||
| FEED RATE | 0 - 0.4 mm/rpm (0 - 0.02 in/rpm) | ||||||
| MAX FEED SPEED (w/ rapid button) | 53 mm/min | ||||||
| REMOVAL MATERIAL | 172 cm3/min | ||||||
| DRIVE UNIT WEIGHT | 105 kg | ||||||
| WS7 Plus | |||||||
| The machine is equipped with an electronic control panel with diagnostic display | |||||||
| TOOL HOLDER SHAFT DIAMETER | 100mm (3.94in) | ||||||
| TOOL HOLDER SHAFT LENGTH | 3000mm Single Shaft (Potentially Connectable) |
||||||
| BORING DIAMETER | 400mm - 1,700mm (15.75in - 66.93in) | ||||||
| WELDING DIAMETER | 400mm - 1,700mm (15.75in - 66.93in) | ||||||
| WELDING TECHNOLOGY | Spiral (Continuous with Variable Step) | ||||||
| LONGITUDINAL STROKE | Unlimited with Step of 260mm (10.24in) | ||||||
| ROTATION MOTOR | C/C (CE Compliant) | ||||||
| FEED MOTOR | C/C (CE Compliant) | ||||||
| FEED SYSTEM | Electric - Mechanical | ||||||
| OUTPUT TORQUE AT THE BAR | 6300 Nm (41 RPM) | ||||||
| MAX ROTATION SPEED | 41 RPM | ||||||
| FEED RATE | 0 - 0.4 mm/rpm (0 - 0.02 in/rpm) | ||||||
| MAX FEED SPEED (w/ rapid button) | 53 mm/min | ||||||
| REMOVAL MATERIAL | 172 cm3/min | ||||||
| DRIVE UNIT WEIGHT | 105 kg | ||||||