| WS5 | |||||||
| The machine is equipped with an electronic control panel with diagnostic display | |||||||
| TOOL HOLDER SHAFT DIAMETER | 80mm (3.15in) | ||||||
| TOOL HOLDER SHAFT LENGTH | 3000mm Single Shaft | ||||||
| BORING DIAMETER | 180mm - 1,000mm (7.09in - 39.37 in) | ||||||
| WELDING DIAMETER | 100mm - 1,000mm (3.94in - 39.37 in) | ||||||
| WELDING TECHNOLOGY | Spiral (Continuous with Variable Step) | ||||||
| LONGITUDINAL STROKE | Unlimited with Step of 260mm (10.24in) | ||||||
| ROTATION MOTOR | C/C (CE Compliant) | ||||||
| FEED MOTOR | C/C (CE Compliant) | ||||||
| FEED SYSTEM | Electric - Mechanical | ||||||
| OUTPUT TORQUE AT THE BAR | 1700 Nm (100 RPM) | ||||||
| MAX ROTATION SPEED | 100 RPM | ||||||
| FEED RATE | 0 - 0.3 mm/rpm (0 - 0.01 in/rpm) | ||||||
| MAX FEED SPEED (w/ rapid button) | 66 mm/min | ||||||
| REMOVAL MATERIAL | 95 cm3/min | ||||||
| DRIVE UNIT WEIGHT | 55 kg | ||||||