| WS3 | |||||||
| The machine is equipped with an electronic control panel with diagnostic display | |||||||
| TOOL HOLDER SHAFT DIAMETER | 60mm (2.36in) | ||||||
| TOOL HOLDER SHAFT LENGTH | 4410 usable mm (3 connectable bars: 1,500mm, 1,500mm, and 1,500mm) |
||||||
| BORING DIAMETER | 42mm - 800mm (1.65in - 31.50 in) | ||||||
| WELDING DIAMETER | 42mm - 800mm (1.65in - 31.50 in) | ||||||
| WELDING TECHNOLOGY | Spiral (Continuous with Variable Step) | ||||||
| LONGITUDINAL STROKE | Unlimited with Step of 250mm (9.84in) | ||||||
| ROTATION MOTOR | C/C (CE Compliant) | ||||||
| FEED MOTOR | C/C (CE Compliant) | ||||||
| FEED SYSTEM | Electric - Mechanical | ||||||
| OUTPUT TORQUE AT THE BAR | 820 Nm (143 RPM) | ||||||
| MAX ROTATION SPEED | 143 RPM | ||||||
| FEED RATE | 0 - 0.3 mm/rpm (0 - 0.01 in/rpm) | ||||||
| MAX FEED SPEED (w/ rapid button) | 105 mm/min | ||||||
| REMOVAL MATERIAL | 75 cm3/min | ||||||
| DRIVE UNIT WEIGHT | 40 kg | ||||||