| WS2 | |||||||
| The machine is equipped with an electronic control panel with diagnostic display | |||||||
| TOOL HOLDER SHAFT DIAMETER | 40mm (1.57in) | ||||||
| TOOL HOLDER SHAFT LENGTH | 2600 usable mm (3 connectable bars: 1,000mm, 1,000mm, and 730mm) |
||||||
| BORING DIAMETER | 22mm - 400mm (0.87in - 15.75 in) | ||||||
| WELDING DIAMETER | 25mm - 400mm (0.98in - 15.75 in) | ||||||
| WELDING TECHNOLOGY | Spiral (Continuous with Variable Step) | ||||||
| LONGITUDINAL STROKE | Unlimited with Step of 220mm (8.66in) | ||||||
| ROTATION MOTOR | C/C (CE Compliant) | ||||||
| FEED MOTOR | C/C (CE Compliant) | ||||||
| FEED SYSTEM | Electric - Mechanical | ||||||
| OUTPUT TORQUE AT THE BAR | 290 Nm (266 RPM) | ||||||
| MAX ROTATION SPEED | 266 RPM | ||||||
| FEED RATE | 0 - 0.5 mm/rpm (0 - 0.02 in/rpm) | ||||||
| MAX FEED SPEED (w/ rapid button) | 285 mm/min | ||||||
| REMOVAL MATERIAL | 23 cm3/min | ||||||
| DRIVE UNIT WEIGHT | 34 kg (27 kg for WS2 Compact) | ||||||
| WS2 Plus | |||||||
| The machine is equipped with an electronic control panel with diagnostic display | |||||||
| TOOL HOLDER SHAFT DIAMETER | 50mm (1.97in) | ||||||
| TOOL HOLDER SHAFT LENGTH | 2660 usable mm (3 connectable bars: 1,000mm, 1,000mm, and 720mm) |
||||||
| BORING DIAMETER | 32mm - 450mm (1.25in - 17.725 in) | ||||||
| WELDING DIAMETER | 25mm - 450mm (0.98in - 17.725 in) | ||||||
| WELDING TECHNOLOGY | Spiral (Continuous with Variable Step) | ||||||
| LONGITUDINAL STROKE | Unlimited with Step of 220mm (8.66in) | ||||||
| ROTATION MOTOR | C/C (CE Compliant) | ||||||
| FEED MOTOR | C/C (CE Compliant) | ||||||
| FEED SYSTEM | Electric - Mechanical | ||||||
| OUTPUT TORQUE AT THE BAR | 290 Nm (266 RPM) | ||||||
| MAX ROTATION SPEED | 266 RPM | ||||||
| FEED RATE | 0 - 0.5 mm/rpm (0 - 0.02 in/rpm) | ||||||
| MAX FEED SPEED (w/ rapid button) | 285 mm/min | ||||||
| REMOVAL MATERIAL | 23 cm3/min | ||||||
| DRIVE UNIT WEIGHT | 35 kg | ||||||