Sir Meccanica F Max
| F Max 3 Axis 800 | |||||||
| The machine is equipped with one control panel, with an auto diagnostic display system, for the rotation and the feed of the arm and the milling cutter. |
|||||||
| DIAMETER OF THE ARM HOLDER SHAFT | 50mm (1.96in) | ||||||
| LENGTH OF THE TOOL HOLDER SHAFT | 600mm (23.62in) | ||||||
| FACING DIAMETER | 300mm - 800mm (11.81in - 39.37in) | ||||||
| RADIAL STROKE OF THE MILLING CUTTER | 180mm (7.09in) | ||||||
| AXIAL STROKE OF THE MILLING CUTTER | 40mm (1.64in) | ||||||
| ARM ROTATION MOTOR | C/C (CE Compliant) | ||||||
| MILLING CUTTER ROTATION MOTOR | C/C (CE Compliant) | ||||||
| AXIAL MOVEMENT SYSTEM | MANUAL | ||||||
| RADIAL MOVEMENT SYSTEM | MOTORIZED C/C (CE Compliant) | ||||||
| MAXIMUM TORQUE ON THE SHAFT OF THE ROTATION ARM |
4,500 Nm (5 RPM) | ||||||
| MAXIMUM TORQUE ON THE SHAFT OF THE ROTATION MILLING CUTTER |
70 Nm (1,500 RPM) | ||||||
| MAXIMUM ROTATION SPEED | 5 RPM | ||||||
| F Max 3 Axis 2000 | |||||||
| The machine is equipped with one control panel, with an auto diagnostic display system, for the rotation and the feed of the arm and the milling cutter. |
|||||||
| DIAMETER OF THE ARM HOLDER SHAFT | 180mm (7.09in) | ||||||
| LENGTH OF THE TOOL HOLDER SHAFT | 2,000mm (78.74in) | ||||||
| FACING DIAMETER | 600mm - 2,000mm (23.62in - 78.74in) | ||||||
| RADIAL STROKE OF THE MILLING CUTTER | 150mm (5.91in) | ||||||
| AXIAL STROKE OF THE MILLING CUTTER | 40mm (1.57in) | ||||||
| ARM ROTATION MOTOR | C/C (CE Compliant) | ||||||
| MILLING CUTTER ROTATION MOTOR | C/C (CE Compliant) | ||||||
| AXIAL MOVEMENT SYSTEM | MANUAL | ||||||
| RADIAL MOVEMENT SYSTEM | MOTORIZED C/C (CE Compliant) | ||||||
| MAXIMUM TORQUE ON THE SHAFT OF THE ROTATION ARM |
27,000 Nm (0.1 RPM) | ||||||
| MAXIMUM TORQUE ON THE SHAFT OF THE ROTATION MILLING CUTTER |
36 Nm (3,000 RPM) | ||||||
| MAXIMUM ROTATION SPEED | 2 RPM | ||||||
| F Max 3 Axis 4000 | |||||||
| The machine is equipped with one control panel, with an auto diagnostic display system, for the rotation and the feed of the arm and the milling cutter. |
|||||||
| DIAMETER OF THE ARM HOLDER SHAFT | 180mm (7.09in) | ||||||
| LENGTH OF THE TOOL HOLDER SHAFT | 4,000mm (157.48in) | ||||||
| FACING DIAMETER | 1,700mm - 4,000mm (66.93in - 157.48in) | ||||||
| RADIAL STROKE OF THE MILLING CUTTER | 250mm (9.84in) | ||||||
| AXIAL STROKE OF THE MILLING CUTTER | 40mm (1.57in) | ||||||
| ARM ROTATION MOTOR | C/C (CE Compliant) | ||||||
| MILLING CUTTER ROTATION MOTOR | C/C (CE Compliant) | ||||||
| AXIAL MOVEMENT SYSTEM | C/C (CE Compliant) | ||||||
| RADIAL MOVEMENT SYSTEM | MOTORIZED C/C (CE Compliant) | ||||||
| MAXIMUM TORQUE ON THE SHAFT OF THE ROTATION ARM |
27,000 Nm (0.1 RPM) | ||||||
| MAXIMUM TORQUE ON THE SHAFT OF THE ROTATION MILLING CUTTER |
45 Nm (3,000 RPM) | ||||||
| MAXIMUM ROTATION SPEED | 3 RPM | ||||||